DO NOT DISTURB // Press the dnd (DND) softkey. The LCD screen indicates that Do Not Disturb is
active on the phone and calls are routed to voice mail. To deactivate, press the dnd (DND) softkey
again.
SET UP A CONFERENCE CALL // Dial the fi first party you want to conference. When the person
answers, press the conf softkey to place the person on hold. Dial the next number you want to include
in the call and press conf again. Repeat these steps to add up to 15 participants to the call.
PARK / RETRIEVE A CALL // While on an active call, press the hold key, obtain a second dial tone,
and press *68 plus the extension number and #. To retrieve a parked call from that extension number,
dial *88# plus the extension number and then press #.
VOICE PORTAL* // Review the VoiceManager User Guide for feature activation and password setup
before using Voice Portal. To change your Call Forwarding Personal Status Manager options, dial the
Voice Portal access number for your area ___________, and enter your 10-digit telephone number and
Voice Portal passcode.
UNIFIED MESSAGING* // From the Voice Mail/Portal Tools menu within MyAccount, select the
Messaging Controls option. Click the Voice Mail Forwarding and Notifi cation Preferences link. Enter the
email address of where you want your voice mail messages sent. Check the Attach Voice Message
checkbox. Select the radio button to the left of the Voice message disposition option you prefer. Click
the Save link.
*This feature may require confi duration before it can be used.
Phone Display
The Cisco Model SPA504G has four line keys, the SPA508G phone has eight line keys, and the
SPA525G2 has fi ve line keys.
Feature Description
1. HANDSET // Pick up to answer or place a call.
2. SPEAKER // Speaker for phone.
3. MESSAGE WAITING INDICATOR // When indicator is:
• Red: You have a new voice mail
To Next Page
Loading...
Need help?
General
