Cisco IP 7975 Series User Manual

| CISCO IP PHONE 7975 SERIES | Instructional & Information Technology Services | 12/15/2010
1. Programmable Buttons
2. Foot stand Button
3. Display Button
4. Messages Button
5. Directories Button
6. Help Button
7. Settings Button
8. Services Button
9. Volume Button
10. Speaker Button
11. Mute Button
12. Headset Button
13. 4-way Navigation Pad
and Select button
(center)
14. Keypad
15. Soft Key Buttons
16. Handset Light Strip
17. Touch Screen
1. Primary Phone Line
2. Programmable Button
Indicators
3. Soft Key Labels
4. Status Line
5. Call Activity Area
6. Phone Tab
7. Features Tab
To activate the Touch
Screen, press the
Display button. This
awakens the phone from
sleep mode. To disable it
for cleaning, press the
Display button again.
No Colour - Ready
for Input
Green Flashing –
Disabled
Green Steady –
Sleep Mode
Press (or tap) items on
the touch screen with
only your fingertips.
Press Speaker button
for hands-free,
then Answer or a
programmable button
(flashing)
or
Press iDivert to send
caller directly to
voice mail
End a Call
Press EndCall soft key
or touch screen
or
Return handset to
cradle
or
On speaker phone,
press the Speaker
button
Place a Call on Hold
1. Press Hold soft
key or touch
screen
2. The hold icon
appears on your
screen
3. The line on hold
will flash
4. Press Resume
soft key or touch
screen to resume
call
Place a Call
Pick up the handset and
dial a number
or
Press the Speaker
button and dial a
number for hands-free
or
Press New Call soft
key or touch screen
Place a Second Call
on Hold
Answer a Call
1. Place the first call
on hold by pressing
the Hold soft key or
touch screen
Lift Handset
or
Press Answer soft key
or touch phone screen
TOUCH SCREEN
CISCO IP 7975 Series
QUICK REFRENCE

Cisco IP 7975 Series Specifications

General

Resolution	320 x 240 pixels
Protocols	SIP, SCCP
Speakerphone	Yes
Bluetooth	No
Wi-Fi	No
USB Port	No
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Power	PoE 802.3af
Codecs	G.711, G.722, iLBC