Cisco CRS-1 - Carrier Routing System Router

5-76
Cisco CRS-1 Series Carrier Routing System XML API Guide
OL-4596-01
Chapter 5 Cisco CRS-1 Series XML and Native Data Access Techniques
Available Set of Native Data Access Techniques
Sample XML Client Request Using the Count Attribute
<?xml version="1.0" encoding="UTF-8"?>
<Request MajorVersion="1" MinorVersion="0">
<Get>
<Configuration>
<BGP MajorVersion="1" MinorVersion="0">
<AS>
<Naming>
<AS>3</AS>
</Naming>
<BGPEntity>
<NeighborTable Count=”5”>
<Neighbor>
<Naming>
<IPAddress>
<IPV4Address>10.0.101.1</IPV4Address>
</IPAddress>
</Naming>
</Neighbor>
</NeighborTable>
</BGPEntity>
</AS>
</BGP>
</Configuration>
</Get>
</Request>
Sample XML Response from the Cisco CRS-1 Series Router
<?xml version="1.0" encoding="UTF-8"?>
<Response MajorVersion="1" MinorVersion="0">
<Get>
<Configuration>
<BGP MajorVersion="1" MinorVersion="0">
<AS>
<Naming>
<AS>3</AS>
</Naming>
<BGPEntity>
<NeighborTable Count=”5”>
<Neighbor>
<Naming>
<IPAddress>
<IPV4Address>10.0.101.1</IPV4Address>
</IPAddress>
</Naming>
.
.
.
data for 1st neighbor returned
here
.
.
.
</Neighbor>
<Neighbor>
<Naming>
<IPAddress>
<IPV4Address>10.0.101.2</IPV4Address>
</IPAddress>
</Naming>
.
.