Cisco EPC3825 User Manual

4021196 Rev A 71
Configure Applications and Gaming
Applications and Gaming Port Range Forward Page Description
Use the descriptions and instructions in the following table to configure the port
range forwarding for the residential gateway. Select enable for each. After you make
your selections, click Save Settings to apply your changes or Cancel Changes to
cancel.
Section Field Description
Start
For the Start port, select a port from the recommended 49152 -
65535 range. Keep in mind that ports used are program specific
so check which ones the program requires to be forwarded.
End
For the End port, select a port from the recommended 49152 -
65535 range. Keep in mind that ports used are program specific
so check which ones the program requires to be forwarded.
Protocol
Select one of the following protocols:
 TCP
 UDP
 Both
IP Address
Enter the computer’s IP address to which this is to apply.
Port Range Forwarding
Enable
Check this box to enable port forwarding for the specified ports
and IP addresses.

Cisco EPC3825 Specifications

General

Model	EPC3825
Category	Gateway
DOCSIS	3.0
Downstream Channels	8
Upstream Channels	4
Wireless Standard	802.11b/g/n
Ethernet Ports	4
Telephony Ports	2
Max Upstream Speed	120 Mbps
Wireless Speed	Up to 300 Mbps
Ethernet Port Speed	10/100/1000 Mbps
USB Ports	1
Security Features	WPA, WPA2