Step 3 Check the Status LED on the back or top of the device; after it is solid green, the system has passed power-on
diagnostics.
Onboard a Device with the Onboarding Wizard
Onboard the threat defense using CDO's onbaording wizard using a CLI registration key.
Procedure
Step 1 In the CDO navigation pane, click Inventory, then click the blue plus button ( ) to Onboard a device.
Step 2 Select the FTD tile.
Step 3 Under Management Mode, be sure FTD is selected.
At any point after selecting FTD as the management mode, you can click Manage Smart License to enroll
in or modify the existing smart licenses available for your device. See Obtain Licenses, on page 122 to see
which licenses are available.
Step 4 Select Use CLI Registration Key as the onboarding method.
Figure 45: Use CLI Registration Key
Step 5 Enter the Device Name and click Next.
Step 6 For the Policy Assignment, use the drop-down menu to choose an access control policy for the device. If you
have no policies configured, choose the Default Access Control Policy.
Step 7 For the Subscription License, click the Physical FTD Device radio button, and then check each of the feature
licenses you want to enable. Click Next.
Cisco Firepower 1010 Getting Started Guide
135
Threat Defense Deployment with CDO
Onboard a Device with the Onboarding Wizard
To Next Page
Loading...
