Need help?Do you have a question about the Cisco FPR1010-ASA-K9 and is the answer not in the manual?
General| Model | FPR1010-ASA-K9 |
|---|---|
| Category | Firewall |
| Maximum VPN Peers | 50 |
| Power Supply | AC |
| Memory | 4 GB |
| Flash Memory | 16 GB |
| IPS Throughput | 250 Mbps |
| Operating System | Cisco ASA |
| Concurrent Connections | 50, 000 |
| Interfaces | 8 x 1G Ethernet |
Explains the choice between Secure Firewall ASA and Threat Defense OS.
Details the available management options for threat defense.
Details on management software for threat defense.
Managers for ASA software.
Comprehensive step-by-step guide for threat defense deployment.
Initial setup of the threat defense system.
Accessing the management center interface.
Connecting the threat defense to the management center.
Setting up fundamental security rules and policies.
Applying configuration changes to the device.
Connecting to the device via command line.
Steps to properly shut down the device.
Step-by-step guide for remote deployment.
Configuration steps for the central administrator.
Initial setup via device manager.
Initial setup via command-line interface.
Deploying the firewall using low-touch method.
Onboarding using serial number and CDO.
Step-by-step guide for device manager deployment.
Accessing the device manager interface.
Initial setup process via device manager.
Setting up product licenses.
Steps to properly shut down the device.
Step-by-step guide for low-touch deployment.
Configuration steps for the central administrator.
Accessing the CDO portal.
Deploying the firewall using low-touch method.
Initial setup via command-line interface.
Setting up fundamental security rules and policies.
General troubleshooting and maintenance procedures.
Shutting down via CDO.
Step-by-step guide for ASA deployment.
Understanding network setup and default ASA config.
Accessing the ASDM interface.
Setting up product licenses for ASA.
Using wizards for ASA configuration.
Connecting via command line.
To Next Page