Power on the Device, on page 64Physical Setup
(Branch admin)
Central administrator: Log Into the Management Center, on page 23.Management Center
(Central admin)
Obtain Licenses for the Management Center, on page 65: Buy feature licenses.Cisco Commerce
Workspace
(Central admin)
Obtain Licenses for the Management Center, on page 65: Generate a license
token for the management center.
Smart Software
Manager
(Central admin)
Obtain Licenses for the Management Center, on page 65: Register the
management center with the Smart Licensing server.
Management Center
(Central admin)
Register the Threat Defense with the Management Center, on page 66.Management Center
(Central admin)
Configure a Basic Security Policy, on page 69.Management Center
(Central admin)
Central Administrator Pre-Configuration
You need to manually pre-configure the threat defense before you send it to the branch office.
(Optional) Check the Software and Install a New Version
To check the software version and, if necessary, install a different version, perform these steps. We recommend
that you install your target version before you configure the firewall. Alternatively, you can perform an upgrade
after you are up and running, but upgrading, which preserves your configuration, may take longer than using
this procedure.
What Version Should I Run?
Cisco recommends running a Gold Star release indicated by a gold star next to the release number on the
software download page. You can also refer to the release strategy described in https://www.cisco.com/c/en/
us/products/collateral/security/firewalls/bulletin-c25-743178.html; for example, this bulletin describes short-term
release numbering (with the latest features), long-term release numbering (maintenance releases and patches
for a longer period of time), or extra long-term release numbering (maintenance releases and patches for the
longest period of time, for government certification).
Cisco Firepower 1010 Getting Started Guide
51
Threat Defense Deployment with a Remote Management Center
Central Administrator Pre-Configuration