IntervalProcedure
AnnuallyWiring/Cable Assemblies
Cleaning:
Annually
External Surfaces
AnnuallyExternal Controls/Connectors
AnnuallyInternal Connectors/Circuit Cards
Visual Inspection
Visually inspect the following items.
How to InspectWhat to Inspect
Inspect for:
• dust, dirt, lubricants, or other foreign matter worn spots or deep scratches
on surfaces
• corrosion
• marred protective finish exposing bare metal
• missing, incorrect or obliterated marking, decals, or reference designators
Exterior surfaces
Inspect for:
• broken, loose, bent, corroded, or missing pins
• cracked insulator inserts
Connectors
Inspect for:
• cuts, nicks, burns, or abrasions
• exposed bare conductors
• sharp bends
• pinched or damaged wires
• broken or loose lacing or clamps
Wiring and cables
Cleaning
Clean exterior surfaces of the equipment at least annually.
Maintenance
3
Maintenance
Visual Inspection
To Next Page
Loading...
Need help?
General
