5
Release Notes for the Cisco IE 2000 Switches, Cisco IOS Release 15.2(1)EY
NEW DOC # PENDING
System Requirements
SFP Modules Supported
The SFP modules are switch Ethernet SFP modules that provide connections to other devices.
Depending on the switch model, these field-replaceable transceiver modules provide uplink or downlink
interfaces. The modules have LC connectors for fiber-optic connections.
You can use any combination of the supported SFP modules.
Cisco IE-2000-16PTC-G-NX 16 10/100BASE-T downlink ports with 4 PoE/PoE+
2 Gigabit Ethernet dual-purpose uplink ports
Supports PoE/PoE+, IEEE-1588 standard for
synchronizing clocks, and Network Address
Translation (NAT) on top of Enhanced LAN Base
image.
Cisco IOS Release 15.0(2)EA1
Cisco IE-2000-8T67-B 8 ports 10/100BASE T M12 connectors Layer 2
switch, all FE ports.
Cisco IOS Release 15.2(1)EY
Cisco IE-2000-16T67-B 16-port 10/100BASE-T M12 connectors Layer 2
switch, all FE ports.
Cisco IOS Release 15.2(1)EY
Cisco IE-2000-24T67-B 16 port 10/100BASE-T M12 connectors Layer 2
switch, all FE ports.
Cisco IOS Release 15.2(1)EY
Cisco IE-2000-8T67P-G-E 8-port 10/100BASE-T, 8-port POE/4-port POE+,
2-port 10/100/1000 uplink, Precision Time Protocol
(PTP) support.
Cisco IOS Release 15.2(1)EY
Cisco IE-2000-16T67P-G-E 8-port 10/100BASE-T, 8-port POE/POE+, 2-port
10/100/1000 uplink, Precision Time Protocol (PTP)
support.
Cisco IOS Release 15.2(1)EY
Cisco IE-2000-4S-TS-G-L
4 10/100BASE-TX SFP module downlink slots
2 Gigabit Ethernet SFP uplink slots
Cisco IOS Release 15.2(1)EY
Cisco IE-2000-4S-TS-G-B
4 10/100BASE-TX SFP module downlink slots
2 Gigabit Ethernet SFP uplink slots
Cisco IOS Release 15.2(1)EY
1. The Cisco IE-2000-16TC-G-X and IE-2000-16PTC-G-NX are the two models available with a conformal coating (Humiseal UB40).
Table 1 Cisco IE 2000 Switches Supported (continued)
Switch Model Description
Supported by Minimum Cisco
IOS Release
To Next Page
Loading...
Need help?
General
