Cisco IR8300 - User Manual

Installing and Connecting the Router
This section describes how to install and connect the Cisco IR8340 router.
• Installing and Connecting the Router, on page 1
• Safety Warnings, on page 1
• Before You Begin, on page 4
• Unpacking the Router, on page 4
• Installing the Router in a Rack, on page 5
• Replacing the SD Flash Memory Card, on page 7
• Connecting the Console Port, on page 8
• Connecting WAN and LAN Interfaces, on page 9
Installing and Connecting the Router
This section describes how to install and connect the Cisco IR8340 router.
For the optimum temperature ranges, do not operate it in an area that less than the minimum of -40°C
and exceeds a maximum recommended ambient temperature of 60°C.
Caution
To view specifications for the Cisco Catalyst IR8340 Rugged Series Router, see the IR8340 data sheet.
Note
Safety Warnings
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Installing and Connecting the Router
1

Cisco IR8300 Specifications

General

Model	IR8300
Device Type	Router
Memory	8 GB DRAM
Storage	8 GB eMMC
Input Voltage	12-48V DC
Operating System	Cisco IOS XE
Product Type	Router
Form Factor	Rack-mountable
Network Interfaces	Gigabit Ethernet
Wireless	Optional Wireless Module
Cellular	4G LTE
Operating Temperature	-40°C to 60°C
Power Supply	Dual redundant power inputs
Security	IPSec, VPN, Firewall, ACLs
Weight	Varies by model, refer to datasheet
Certifications	CE, FCC, IC, RCM