Need help?Do you have a question about the Cisco IR829 and is the answer not in the manual?
General| Serial Interfaces | 1 x RS-232 |
|---|---|
| USB Ports | 1 x USB 2.0 |
| Wireless | 802.11a/b/g/n |
| Product Type | Router |
| Form Factor | Rack-mountable |
| Connectivity Technology | Wired, Wireless |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| WAN Ports Qty | 2 |
| LAN Ports Qty | 4 |
| Cellular Protocol | LTE |
| Memory | 2 GB DDR3 |
| WAN Interfaces | 2 x Gigabit Ethernet |
| LAN Interfaces | 4 x 10/100/1000 Ethernet |
| Operating Temperature | -20 °C to 60 °C |
| Processor | 1.2 GHz |
Lists the necessary equipment, tools, and connection types required for successfully installing the Cisco IR829.
Explains the critical steps for properly grounding the Cisco IR829 for safety and compliance.
Provides detailed instructions on how to connect the Cisco IR829 to a DC power source, including pin-outs.
Details the 4-pin locking connector and pin assignments for DC power connections on the Cisco IR829.
Guides users through the initial router configuration using the setup command facility and prompts.
Details how to configure Cisco IOS to provide network connectivity for the Guest OS VM.
Covers setting the root password and enabling SSH access for the Guest OS on the IR829.
Explains how to configure Network Address Translation (NAT) for Guest OS network connectivity.
Provides commands and methods to diagnose and resolve common configuration failures for the Guest OS.
Lists the operational limits, physical characteristics, and environmental requirements for the Cisco IR829.
Lists essential safety instructions and warnings for the installation process, covering various hazards.
To Next Page
