1-6
Cisco IR829 Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
SKU Information
Memory
The Cisco IR829 uses flash memory and main memory. The flash memory contains the Cisco IOS
software image and the boot flash contains the ROMMON boot code. All memory components are
factory default and not upgradeable by the end user.
Table 1-2 shows the memory allocation.
Ta b l e 1-2 Cisco IR829 Memory
SKU Information
Table 1-1 lists the different SKUs available for the Cisco ISRs. All SKUs support external antenna.
Hardware Features
This section provides an overview of the following hardware features for the Cisco IR829.
• Platform Features for Cisco IR829, page 1-7
• Antennas, page 1-8
-90 — 75dBm Off Off On - Green
-75 — 60dBm Off On - Green On - Green
>60dBm On - Green On - Green On - Green
RSSI RSSI (2) RSSI (1) RSSI (0)
Memory Capacity
DDR 2GB
Boot ROM 16MB
System Flash 4GB
Ta b l e 1-3 Supported SKUs for Cisco IR829s
SKU ID Description
IR829GW-LTE-VZ-
AK9
C829 Hardened WAN GE 4G LTE secure platform multi-mode Verizon
LTE/DoRa with 802.11n, FCC compliant
IR829GW-LTE-NA-
AK9
C829 Hardened WAN GE 4G LTE secure platform multi-mode ATT and
Canada LTE/HSPA+ with 802.11n, FCC compliant
IR829GW-LTE-GA-
EK9
C829 Hardened WAN GE 4G LTE secure platform multi-mode Global
(Europe) LTE/HSPA+ with 802.11n, ETSI Compliant
IR829GW-LTE-GA-
ZK9
C829 Hardened WAN GE 4G LTE secure platform multi-mode Global
(Australia) LTE/HSPA+ with 802.11n, Australia Compliant