Cisco IR1101

Product Overview
This section contains the following:
• Product Overview, on page 1
• General Description, on page 1
• SKU Information, on page 2
• Cisco IR1101 Series Platform Features, on page 3
• Front Panel Icons and LEDs, on page 12
• Supported Cisco Antennas and Antenna Accessories, on page 14
• Modem Support, on page 14
• Power Supply, on page 17
• RJ45 Ports, on page 18
• Ethernet and Optical SFP Modules, on page 19
• DSL SFP Module, on page 20
Product Overview
This chapter provides an overview of the features available for the Cisco IR1101 Industrial Integrated Services
Router and its Expansion Module. It contains the following sections:
Prior to installing this device read the Regulatory Compliance and Safety Information .
Note
General Description
The Cisco IR1101 Industrial Integrated Services Router is a next generation modular industrial router which
has a base module with additional Pluggable Modules that can be added. The Pluggable Module provides the
flexibility of adding different interfaces to the IR1101 platform, for example, a cellular module.
The IR1101 ISR also has an Expansion Module that adds key capabilities such as dual LTE Pluggables,
mSATA SSD FRU, SFP, and Digital GPIO connections.
Product Overview
1

Cisco IR1101 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
SIM card slot	-
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1Q
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
USB version	2.0
USB ports quantity	2
Combo SFP ports quantity	1
Ethernet LAN (RJ-45) ports	4
Output voltage	12 - 48 V
Power source type	DC
Power consumption (typical)	9.8 W
Operating altitude	-152.4 - 1524 m
Operating temperature (T-T)	-40 - 60 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	UL 60950-1, 2nd edition; CAN/CSA C22.2 No. 60950-1, 2nd edition, EN 60950-1, 2nd edition; CB to IEC 60950-1, 2nd edition
Flash memory	8000 MB
Storage media	Flash
Internal memory	4096 MB
Internal memory type	DRAM
Electromagnetic compatibility	47 CFR Part 15 B, EN 55032:2015, CISPR 32 Edition 2, CNS13438: 2006, EN 300 386 V1.6.1, ICES-003 Issue 6: 2016, KN 32: 2015, TCVN 7189: 2009, V-2/2015.04, V-3/2015.04, AS/NZ CISPR32, EN 61000-4-2, 3, 4, 5, 6, 8, 9, 16, 17, 18, and 29, CISPR24: 2010 + A1: 2015, EN 300 386 V1.6.1, EN 55024: 2010 + A1: 2015, EN 55035:2017, KN35: 2015, TCVN 7317:2003, QCVN 18:2014
Product color	Black
Routing protocols	BGP, EIGRP, HSRP, RIP-1, RIP-2
Data link protocols	IPv4, IPv6
Supported protocols	SCADA, DNP3, T101-104, Raw Socket TCP, UDP
Mobile network generation	Not supported
VPN support	Cisco Easy VPN Solution client and server NAT transparency Dynamic Multipoint VPN (DMVPN) Tunnel-less Group Encrypted Transport VPN Flex VPN
Firewall security	Cisco IOS
Security algorithms	256-bit AES, HTTPS, IPSec, SSL/TLS
Authentication method	Secure HTTP (HTTPS), FTP, Telnet Authentication Proxy
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	124.9 mm
Width	132.5 mm
Height	60 mm
Weight	1020 g

Summary

Product Overview

Product Overview

This chapter provides an overview of the features available for the Cisco IR1101 Industrial Integrated Services Router and its Expansion Module.

General Description

Describes the Cisco IR1101 Industrial Integrated Services Router as a next-generation modular industrial router with pluggable and expansion modules.

SKU Information

Lists the different SKUs available for the Cisco IR1101, including Base Unit and Expansion Modules.

Cisco IR1101 Series Platform Features

Details the hardware platform features of the Cisco IR1101 Base Router, including power, ports, and compliance.

Front Panel Icons and LEDs

Explains the icons and LEDs on the IR1100 Series devices, detailing their status and meaning for operation.

Supported Cisco Antennas and Antenna Accessories

Discusses antenna connectivity for the IR1101 with Pluggable Modules, referencing an external guide for details.

Modem Support

Details the Sierra Wireless series modems used with the IR1101, including technology and SKU compatibility.

Power Supply

Describes the external DC power connector and its 4-pin power entry receptacle and plug for the IR1101.

RJ45 Ports

Details the isolated RS232 port, its conformity to EIA-561, and pinout characteristics for DTE connections.

Ethernet and Optical SFP Modules

Explains the field-replaceable transceiver modules for uplink interfaces, supporting copper and optical connections.

DSL SFP Module

Provides information on the DSL SFP module, including installation, removal, and its 8-pin modular jack pin-outs.