Cisco IR829 User Manual

2
Getting started with the Cisco 829 Integrated Services Router
78-100611-01A0
Cisco Information
Introduction
The purpose of this document is to provide the installer the necessary information for installing the Cisco
IR829 Integrated Services Router. The documentation is on-line, and subject to change. Make sure that
you are downloading or viewing on-line the latest version before beginning an installation.
This document also contains Product Compliance and Safety information.
Items Shipped with your Router
Unpack the box and verify that all items listed on the invoice were shipped with the Cisco IR829.
The following items are shipped with your router:
• This document Part Number 78-100611
• Power Cable components
• Grounding Lug
• Ethernet Cable Part Number 75-1501-01
Equipment that you supply
• ESD-preventive cord and wrist strap.
• Wire-stripping tools for stripping 14- and 18-gauge wires
• Crimping tool
• Ratcheting torque screwdriver that exerts up to 15 in-lb (1.69 N-m) of pressure.
Table 1 Cisco Company Name and Address Details
Company Name Cisco Address
Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134-1706, United States.

Cisco IR829 Specifications

General

Serial Interfaces	1 x RS-232
USB Ports	1 x USB 2.0
Wireless	802.11a/b/g/n
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired, Wireless
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
WAN Ports Qty	2
LAN Ports Qty	4
Cellular Protocol	LTE
Memory	2 GB DDR3
WAN Interfaces	2 x Gigabit Ethernet
LAN Interfaces	4 x 10/100/1000 Ethernet
Operating Temperature	-20 °C to 60 °C
Processor	1.2 GHz