Cisco Linksys WET610N Quick Installation Guide

WET61ON
Installation
P. Please wait whi e the Setup Wizard connects the Bridge to your wireless
network. Warnings from your firewall or security application may
appear.
If necessary, click Always a ow or Allow this time only to
allow the wireless connection.
Q. You will connect the Bridge
to the device that you want to
equip with wireless.
Click Next.
R. The Bridge is connected to your
router
with a network cable.
Disconnect this
network cable
from your router.
If you need to move the device
that you
want to equip with
wireless, then do so now. Click
ext.
s. Connect the free end of the
network cable
to the device that
you want to equip with wireless.
If you need to move the Bridge,
then make sure you take the
power adapter and
network
cable with you.
Click Next.
Wireless-N Ethernet Bridge with Dual-Band 7

Cisco Linksys WET610N Specifications

General

Brand	Cisco
Model	Linksys WET610N
Category	Network Router
Language	English