Cisco Linksys WET610N Quick Installation Guide

Installation
T. Wait until the Power and
Ethernet
LEDs are solidly lit, and
the Wireless LED is flash"ng.
Click
ext.
u. The wireless settings are
displayed.
To save the settings in a text
file on your desktop, keep the
default, Save these settings in
a text f-Ie on my desktop.
Click Next.
v. The Bridge is installed. You can
move
the Bridge anywhere
within your wireless network's
range,
as long as you plug its
power cord into an electrical
outlet.
Refer
to the User Guide on the
CD-ROM for information about
advanced settings.
WET61ON
Congratulations! Setup is complete.
8
Wireless-N Ethernet Bridge with Dual-Band

Cisco Linksys WET610N Specifications

General

Brand	Cisco
Model	Linksys WET610N
Category	Network Router
Language	English