Cisco Linksys WRT300N User Manual

21
Chapter 5: Configuring the Wireless-N Broadband Router
The Setup Tab - Advanced Routing
Wireless-N Broadband Router
Show Routing Table. Click the Show Routing Table button to open a screen displaying how data is routed
through your local network. For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Interface
are displayed. Click the Refresh button to update the information. Click the Close button to exit this screen.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. For more information, click Help.
Figure 5-13: Routing Table

Cisco Linksys WRT300N Specifications

General

Brand	Cisco
Model	Linksys WRT300N
Category	Network Router
Language	English