45
Chapter 5: Configuring the Wireless-N Broadband Router
The Administration Tab - Factory Defaults
Wireless-N Broadband Router
The Administration Tab - Factory Defaults
The Factory Defaults screen allows you to restore the Router’s configuration to its factory default settings.
Factory Defaults
Restore All Settings. To clear all of the Router’s settings and reset them to their factory defaults, click the
Restore All Settings button.
Restore Wireless Settings. To clear all of the Router’s Wireless settings and reset them to their factory defaults,
click the Restore Wireless Settings button.
Help information is shown on the right-hand side of the screen.
Figure 5-47: Administration Tab - Factory Defaults
NOTE: Do not restore the factory defaults unless you are having difficulties with the Router and
have exhausted all other troubleshooting measures. Once the Router is reset, you will have to re-
enter all of your configuration settings.
To Next Page
Loading...
Need help?
General
