K. Enter the name of your wireless
network.
Click Next.
L. If your network does not use
wireless security, proceed to
step M.
If your network uses wireless
security, enter the security key
of your wireless network. Click
Next.
NOTE: If you are connecting to your own wireless network, you
may want to configure wireless security on your router if you
have not already done so.
M. Please wait while the Setup
Wizard connects the Adapter to
your wireless network.
Warnings from your firewall or
security application may appear.
If necessary, click Always allow
or Allow this time only to allow
the wireless connection.
N. The Adapter is connected to
your wireless network. Click
Finish.
To Next Page
Loading...
Need help?
General