O. The settings of the Adapter have
been saved to your desktop as
Linksys Adapter.txt (a text file).
Click OK.
P. The Linksys Wireless Manager
icon appears on your
desktop’s system tray. Use
this utility to change wireless
settings or connect to a
different wireless network. You
can access the utility from the
Start menu, or double-click the
Manager icon in the system
tray. Click OK.
Congratulations! Setup is complete.
Wi-Fi Protected Setup 2
Use Wi-Fi Protected Setup to create a wireless connection between the
Adapter and your router.
A. On your router, press the button
that looks like one of the icons
in the picture. You may have to
hold down this button until an
LED flashes.
Within two minutes, click
Connect on the Quickly Connect
Using Push Button screen. Then
proceed to step C.
If you do not want to use the
push button method, click Skip
on this screen, and proceed to
step B.
Wi-Fi Protected Setup Button on Router
To Next Page
Loading...
Need help?
General