Cisco MDS 9700 Series Installing

Figure 2: Positioning Bottom-Support Rail - Cisco MDS 9710 Chassis
Position two bottom-support rails at the lowest RU on the
rack.
1
Allow at least 24.5 inches (62.2 cm) (14 RU) for each
chassis.
2
Installing the Cisco MDS 9700 Series Switches
8
Installing the Cisco MDS 9700 Series Switches
Attaching Bottom-Support Rails to a Four-Post Rack

Cisco MDS 9700 Series Specifications

General

Brand	Cisco
Model	MDS 9700 Series
Category	Switch
Language	English