Cisco ME-4924-10GE - Page 4

Contents
iv
Cisco ME 4924-10GE Ethernet Switch Hardware Installation Guide
OL-10071-01
Environmental Monitoring of the Power Supplies 1-8
Power Management for the Cisco ME 4924-10GE Switch 1-8
Power Management Modes 1-8
Management Options 1-8
Network Configurations 1-9
CHAPTER 2 Switch Installation 2-1
Preparing for Installation 2-1
Warnings 2-1
Installation Guidelines 2-3
Verifying Package Contents 2-3
Verifying Switch Operation 2-4
Connecting a PC or Terminal to the Console Port 2-4
Powering On the Switch and Running POST 2-5
Powering Off the Switch and Disconnecting the Console Port 2-6
Rack-Mounting the Switch 2-6
Attaching Brackets to the Switch 2-6
Mounting the Switch in a Rack 2-7
Attaching the Cable Guide 2-7
Installing and Removing SFP Modules 2-7
Installing SFP Modules into SFP Module Ports 2-8
Removing SFP Modules from SFP Module Ports 2-9
Connecting to an SFP Module 2-10
Connecting to a Fiber-Optic SFP Module 2-10
Connecting to 1000BASE-T SFP Modules 2-12
X2 Module Handling Guidelines and Installation 2-12
Installing the 10-Gigabit Ethernet X2 Module 2-14
Removing the 10-Gigabit Ethernet X2 Module 2-16
Module Maintenance Guidelines 2-16
Cleaning the Fiber-Optic Connectors 2-17
Where to Go Next 2-18
CHAPTER 3 Connecting the Power Supply 3-1
Grounding Requirements 3-1
Connecting AC Power to the Cisco ME 4924-10GE Switch 3-2
Connecting DC Power to the Cisco ME 4924-10GE Switch 3-3