• Power consumption: 30W to 40W (802.3at required)
• Power over Ethernet injector (MA-INJ-6) and DC adapter (MA-
PWR-50WAC)
Note: PoE Injector and DC adapter sold separately
Note: Actual power consumption may vary depending on the AP
usage.
USB will be disabled when powered by 802/3 at/PoE+
It is recommended that you ensure that LLDP is enabled to allow
proper power negotiation
Environment
• Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
• Storage and Transportation Temperature: -4 °F to 158 °F (-20
°C to 70 °C)
• Humidity: 5 to 95% non-condensing
Physical Security
• Screws that can be attached to the security hasp of the
universal mounting bracket
• Kensington lock hard point
• Concealed mount plate with anti-tamper cable bay
Product View and Physical Features
Your MR57 has the following features:
2
To Next Page
Loading...
Need help?
General
