Cisco Meraki MV12 User Manual

!
6
6. Place the camera over the top of the mount plate and match to plate hooks/mounts. Secure with
Phillips or Torx head safety screw.
7. Aim the lens. Look through the camera on the Meraki Dashboard to fine tune the picture. The
camera sensor and lens unit can be physically tilted through a range of 65 degrees, rotated through
a range of 350 degrees, and panned through a range of 350 degrees. The image can only be
rotated by 180 degrees in software and no other adjustments can be made. Zoom and focus can be
adjusted remotely and cannot be adjusted physically on the camera.

Cisco Meraki MV12 Specifications

General

Brand	Cisco
Model	Meraki MV12
Category	Security Camera
Language	English