Cisco Meraki MX65 - User Manual

MX64 Installation Guide
Note - The MX18.1 firmware release will be the maximum running build
for MX64, MX64W, MX65, MX65W, MX84, MX100, and vMX100
platforms. These platforms will not run MX 18.2 and above firmware
builds. We recommend you stay up to date with all the latest features
with the next-generation hardware platforms. Please consult your
sales representative for more information on the latest hardware
and software releases. Thank you
This document describes how to install and set up the MX64 security
appliance. Additional reference documents are available online at:
www.meraki.com/library/products.
MX64 Overview
The Meraki MX64 is an enterprise security appliance designed for
distributed deployments that require remote administration. It is ideal for
network administrators who demand both ease of deployment and a
state-of-the-art feature set. This appliance provides the following new
features:
• USB port, to support approved 3G/4G cards for failover to cellular
networks.
• Support for four LAN connections
• Wall screws and anchors for mounting drywall surface, either
vertically or horizontally
Package contents
In addition to the MX64, the following are provided.
1

Cisco Meraki MX65 Specifications

General

Form Factor	Desktop
Firewall Throughput	450 Mbps
VPN Throughput	200 Mbps
Maximum VPN Tunnels	50
Power Supply	AC
Weight	2.2 lb (1.0 kg)
Recommended Clients	50
LAN Ports	8
WAN Ports	2
Power over Ethernet (PoE)	No
WAN Interfaces	2
LAN Interfaces	8
Operating Temperature	32° to 104°F (0° to 40°C)
Dimensions (H x W x D)	1.73 x 8.27 x 6.89 in (4.4 x 21.0 x 17.5 cm)

Summary

MX64 Overview

Package Contents

MX64 Hardware Panels

MX64 Front Panel Status Indicator

Describes LED patterns indicating device status like power, connection, and firmware upgrades.

MX64 Back Panel Functions

Details USB and LAN ports for connectivity, and the WAN/Internet port for WAN connection.

MX64 Bottom Panel Label

Locates the serial number on the product label at the bottom of the MX64.

Mounting Hardware

Connecting to WAN and Network Configuration

Setting Up Static IP Address

Configures basic connectivity and networking parameters via a client PC web service.

Setting Up DHCP IP Address

Configures the MX device by plugging into upstream WAN/ISP servers for DHCP negotiation.

Additional WAN and Network Settings

Covers VLAN tagging, secondary WAN interface setup, and PPPoE authentication for DSL circuits.

Advanced Configuration Settings

Web Proxy Settings

Configures web proxy settings for HTTP fallback to contact the Cloud Controller.

Configuring Physical Link Settings

Sets physical link parameters like duplex mode and data rates for Ethernet ports.