Need help?Do you have a question about the Cisco APIC M3 and is the answer not in the manual?
General| Product Type | Application Policy Infrastructure Controller |
|---|---|
| Model | APIC-M3 |
| Form Factor | Rack-mountable |
| CPU Clock Speed | 2.2 GHz |
| Power Supply | Dual redundant |
| Processor | Intel Xeon |
| Memory | 64 GB |
| Management Port | 1 x 1 Gigabit Ethernet |
| Power Supply Capacity | 770W |
| Management | Cisco APIC |
| Operating System | Cisco APIC Software |
| Weight | 35 lb (15.9 kg) |
Details the locations of field-replaceable components within the server with the top cover removed.
Provides a summary of the server's key hardware features, including chassis, processor, memory, and I/O.
Lists important safety warnings and general guidelines to follow before installing the server.
Step-by-step instructions for securely mounting the server into a rack using slide rails.
Guides through the initial power-on, IP address assignment, and management connection process.
Details how to configure system settings, NIC mode, and redundancy via the Cisco IMC interface.
Provides procedures for simultaneously updating the server's BIOS and Cisco IMC firmware.
Details the status and activity LEDs located on the front panel of the server.
Details the status and activity LEDs located on the rear panel of the server.
Procedures for safely shutting down the server and removing power for maintenance.
Step-by-step guide to removing and reinstalling the server's top cover for component access.
Instructions for replacing hot-swappable SAS/SATA drives.
Procedure for removing and installing 2.5-inch or 3.5-inch NVMe SSDs in front bays.
Detailed procedures for replacing CPUs and their associated heatsink assemblies.
Instructions for identifying and replacing faulty memory DIMMs.
Procedures for replacing server power supply units (PSUs).
Instructions for installing or replacing Peripheral Component Interconnect Express (PCIe) cards.
Steps to install a Trusted Platform Module (TPM) for enhanced security.
Procedure to clear CMOS settings using a specific jumper for troubleshooting.
Details the physical dimensions (height, width, depth) and weight of the server.
Outlines environmental requirements such as temperature, humidity, and altitude for operation.
Provides information on supported power supply options and their electrical specifications.
Lists supported SAS RAID, HBA controllers, and their associated cabling requirements.
Information on ensuring storage controller firmware compatibility with server BIOS/IMC.
Instructions for installing LSI MegaSR drivers for Windows Server and Linux distributions.
Lists minimum server firmware versions required for supported GPU cards.
Procedure for removing and installing a single-wide GPU card in a PCIe slot.
Steps to update server BIOS and install GPU drivers for proper system functionality.
Instructions and references for integrating the server with Cisco UCS Manager.
To Next Page
