Cisco Meraki MX67 User Manual

A steady green LED indicates bidirectional connectivity,
and flashing green indicates traffic.
Power input Designed for use only with the unit’s power supply.
Reset button
Insert a paper clip if a reset is required.
Press for 1 second to delete a downloaded configuration
and reboot.
Press and hold for more than 10 seconds to force a full
factory reset.
MX68
MX68W
6

Cisco Meraki MX67 Specifications

General

Model	MX67
Category	Security System
Firewall Throughput	450 Mbps
VPN Throughput	200 Mbps
Advanced Security Throughput	250 Mbps
Maximum VPN Tunnels	50
Recommended Clients	50
LAN Interfaces	4 x GbE
802.11ac Wave 2	No
USB Interface	1 x USB 2.0
Power over Ethernet (PoE)	No
Operating Temperature	32°F to 104°F (0°C to 40°C)
WAN Interfaces	2 x GbE
Operating Humidity	5 to 95% non-condensing