Cisco MX200 Series User Manual

23
D1458217 User Guide Cisco TelePresence
Prole Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.
Point-to-point video calls
In call with two parties, but one at a time
This feature allows you to be in a call
with two parties, but one at a time
only.
You may swap whom you are in call
with, and you may connect the two
together, while you leave the call.
About this feature
Locate
whom to
call in the
usual way.
Assume that
you are in a
call. Tap Hold,
as outlined.
Tap + Place New Call, as
outlined, or tap Resume to go
back to the one you were in
call with (to undo your action).
Place the call in the
usual way.
You are now in the new
call while the one you
were in call with still is
on hold.
Tap Swap to
go between
the two parties
and Transfer to
connect the two
together while you leave the call.

Cisco MX200 Series Specifications

General

OS	Cisco Collaboration Endpoint Software
Product Type	Video conferencing system
Audio	Integrated speakers and support for external audio devices
Microphones	Integrated microphones and support for external microphones
Network	Ethernet
Connectivity	HDMI, USB
Video Standards	H.264, H.265
Audio Standards	AAC
Protocols	SIP, H.323
Display Resolution	Up to 4K
Power	100-240V AC, 50/60Hz