Cisco Nexus 3500 - Page 50

DescriptionStatusLEDComponent
The operator has
activated this LED
to identify this
switch in the
chassis.
Flashing blueBeacon (BCN)Chassis (front and
back)
Identifies the chassis
receiving the beacon
signal.
On (blue)Identification (ID)
This port has no
physical link.
Left side
Off
Solid on (green)
Management
(MGMT)
This port has a
physical link.
This port has no
activity.
Right side
Off
Blinking (green)
This port has
activity.
Port admin state is
'Enabled', SFP is
present and the
interface is
connected (that is,
cabled, and the link
is up).
Green
Port
Port admin state is
'Disabled, or the
SFP is absent, or
both.
Amber
Port admin state is
'Enabled' and SFP is
present, but interface
is not connected.
Off
All diagnostics pass.
The module is
operational.
Solid on (green)Status (STS)
The module is not
receiving power.
Off
On (amber)
Cisco Nexus 3500 Hardware Installation Guide
42
LEDs
LEDs