Cisco Nexus 5600 Series - Page 106

Show Commands
show ipv6 pim event-history
MCR-102
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ipv6 pim event-history
To display information in the IPv6 Protocol Independent Multicast (PIM6) event history buffers, use the
show ipv6 pim event-history command.
show ipv6 pim event-history {errors | msgs | statistics}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information in the PIM6 msgs event history buffer:
switch(config)# show ipv6 pim event-history msgs
Note: PIM6 process currently not running
switch(config)#
Related Commands
errors Displays events of type error.
msgs Displays events of type msg.
statistics Displays events of type statistics.
Release Modification
5.0(3)N1(1) This command was introduced.
Command Description
clear ipv6 pim
event-history
Clears the contents of the PIM6 event history buffers.
ipv6 pim event-history Configures the size of PIM6 event history buffers.