Cisco Nexus 5600 Series - Page 107

Show Commands
show ipv6 pim group-range
MCR-103
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ipv6 pim group-range
To display information about IPv6 Protocol Independent Multicast (PIM6) group ranges, use the show
ipv6 pim group-range command.
show ipv6 pim group-range [group] [vrf {vrf-name | all}]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the Enterprise Services license.
Examples This example shows how to display information about PIM6 group ranges:
switch(config)# show ipv6 pim group-range
PIM6 Group-Range Configuration for VRF "default"
Group-range Mode RP-address Shared-tree-only range
ff30::/32 SSM - -
ff1e:abcd:def1::/96 ASM 2001:0db8:0000:abcd::0001
-
switch(config)#
group (Optional) Group address.
vrf (Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Specifies all VRFs.
Release Modification
5.0(3)N1(1) This command was introduced.