Cisco Nexus 5600 Series - Page 185

181
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip igmp groups
Examples This example shows how to display information about the IGMP-attached group membership:
switch(config)# show ip igmp groups
IGMP Connected Group Membership for VRF "default" - 0 total entries
Type: S - Static, D - Dynamic, L - Local, T - SSM Translated
Group Address Type Interface Uptime Expires Last Reporter
switch(config)#
Related Commands Command Description
show ip igmp route Displays information about the IGMP-attached group membership.