Cisco Nexus 5600 Series - show ip msdp peer

267
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip msdp peer
show ip msdp peer
To display information about Multicast Source Discovery Protocol (MSDP) peers, use the show ip msdp
peer command.
show ip msdp peer [peer-address] [vrf {vrf-name | all}]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to display information about MSDP peers:
switch(config)# show ip msdp peer
peer-address (Optional) IP address of an MSDP peer.
vrf (Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Specifies all VRFs.
Release Modification
6.0(2)N1(1) This command was introduced.