Cisco Nexus 7000 Series - User Manual

Cisco Systems, Inc.
www.cisco.com
Replacing Memory on a Cisco Nexus
7000 Series I/O Module
Date: November 17, 2016
Part Number: 78-100406-01
This document describes how to replace the DIMM on a Cisco Nexus 7000 Series
I/O module.
Note Before you install, operate, or service the system, read the Cisco Nexus 7000
Series Regulatory Compliance and Safety Information for important safety
information.
Replacing a DIMM on an I/O Module
To replace a DIMM on a Cisco Nexus 7000 Series I/O module, follow these steps:

Cisco Nexus 7000 Series Specifications

General

Chassis	Modular
Operating System	Cisco NX-OS
Latency	Sub-microsecond
IPv6 Support	Yes
Redundancy	Power supplies, fans, supervisors, fabric modules
Power Supply	AC or DC
Layer Support	L2, L3
Network Management	CLI, SNMP
Virtualization	VRF, vPC
Ports	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported Modules	Various (1G, 10G, 40G, 100G)
Features	FCoE, OTV, LISP
MPLS Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, Cisco TrustSec, Control Plane Policing (CoPP)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 to 95% noncondensing
MTBF	Varies by model
Number of Slots	Varies by model (9-slot, 10-slot, 18-slot)

Summary

Cisco Nexus 7000 Series I;O Module Memory Replacement Guide

DIMM Replacement Procedure Steps

Detailed steps for removing and installing a DIMM on a Cisco Nexus 7000 Series I/O module, including safety and verification.

Related Cisco NX-OS Documentation

Lists relevant Cisco NX-OS configuration guides, command references, and other software documentation.

Cisco Documentation and Support Resources

Information on accessing Cisco documentation, RSS feeds, and submitting service requests.