Cisco Nexus 9372PX User Manual

Cisco Nexus 9372PX and 9372PX-E NX-OS-Mode Switches Hardware
Installation Guide
First Published: September 30, 2014
Last Modified: November 17, 2015
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Cisco Nexus 9372PX Specifications

General

Brand	Cisco
Model	Nexus 9372PX
Category	Switch
Language	English

Summary

Preface

Documentation Conventions

Explains conventions used in command descriptions and examples for clarity.

Related Documentation

Lists other Cisco Nexus 9000 Series NX-OS software and hardware documents available.

Switch Installation Procedures

Switch Overview and Components

Describes the Cisco Nexus 9372PX/PX-E switch chassis and its user-replaceable components.

Site Preparation Requirements

Details environmental, power, airflow, rack, and clearance requirements for the installation site.

Installing the Switch Chassis

Covers safety, installation guidelines, unpacking, grounding, and initial startup of the switch.

Connecting to the Network

Guides on connecting the switch to a console, management interface, and network devices.

Replacing Components

Provides instructions for replacing fan modules and power supply modules.

Specifications and Appendices

Rack Specifications

Outlines requirements for cabinets and racks, including dimensions and clearances.

System Specifications

Details environmental, physical, power input, and power cord specifications for the switch.

LED Indicators

Explains the status and meaning of LEDs on the switch chassis, fan modules, and power supplies.

Accessory Kit Contents

Lists the items included in the standard accessory kit for the switch.

Site Preparation Records

Provides worksheets for recording site preparation, contact, and chassis/module information.