EasyManua.ls Logo

Cisco Nexus 93360YC-FX2 User Manual

Cisco Nexus 93360YC-FX2
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cisco Nexus 93360YC-FX2 NX-OS Mode Switch Hardware Installation
Guide
First Published: 2019-07-20
Last Modified: 2020-07-22
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cisco Nexus 93360YC-FX2 and is the answer not in the manual?

Cisco Nexus 93360YC-FX2 Specifications

General IconGeneral
ModelNexus 93360YC-FX2
Product SeriesNexus 9000
Product TypeSwitch
Jumbo Frame Supportup to 9216 bytes
Power SupplyDual Redundant Power Supplies
Operating SystemCisco NX-OS
Flash Memory16 GB
Latency< 1 microsecond
Operating Temperature0 to 40 degrees Celsius

Summary

Preface

Audience

Defines the intended readers of the guide.

Documentation Conventions

Explains the typographical conventions used in the document.

Documentation Feedback

Information on how to provide feedback on the document.

Preparing the Site

Temperature and Humidity Requirements

Specifies acceptable temperature and humidity ranges for the switch.

Grounding Requirements

Explains the importance and methods of grounding the switch.

Planning for Power Requirements

Discusses power supply options and provisioning for redundancy.

Installing the Chassis

Installation Options with Rack-Mount Kits

Describes available rack-mount kits for switch installation.

Installing the Chassis in a Two-Post Rack

Detailed steps for mounting the switch in a two-post rack.

Installing the Chassis in a Four-Post Rack

Detailed steps for mounting the switch in a four-post rack.

Connecting the Switch to the Network

Connecting a Console to the Switch

Steps for establishing a console connection for initial configuration.

Setting Up the Management Interface

Instructions for configuring the network management port.

Related product manuals