EasyManua.ls Logo

Cisco Nexus 93360YC-FX2 - 1200-W HVAC;HVDC Power Supply Specifications; 930-W DC Power Supply Specifications

Cisco Nexus 93360YC-FX2
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1200-W HVAC/HVDC Power Supply Specifications
These specifications apply to the 1200-W HVAC/HVDC (N9K-PUV-1200W) power supplies.
SpecificationCharacteristic
Nominal (Range)
200 to 277 VAC
–240 to –380 VDC
Input voltage
AC (for 1230 W output)
DC (for 1230 W output)
Nominal: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
35 A (cold turn on); 70 A (hot turn on)Maximum inrush current
Per power supply
1230 W
1230 W
Maximum output Watts
For 200 to 277 VAC
For 192 to 400 VDC
Per power supply
12 VAC at 100 A
12 VDC at 100 A
Power supply output voltage
For 200 to 277 VAC
For 192 to 400 VDC
12 V at 2.5 APower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum
certified)
Efficiency rating
RSP1Form factor
930-W DC Power Supply Specifications
These specifications apply to the following power supplies:
NXA-PDC-930W-PE
NXA-PDC-930W-PI
SpecificationCharacteristic
Nominal range: -48 to -60 VDC nominal (Range: -40
to -60 VDC
DC input voltage range
23 A at -48 VDCMaximum DC input current
1104 WMaximum input W
930 WMaximum output power per power supply
35 A (sub-cycle duration)Maximum inrush current
Cisco Nexus 93360YC-FX2 NX-OS Mode Switch Hardware Installation Guide
56
System Specifications
1200-W HVAC/HVDC Power Supply Specifications

Table of Contents

Related product manuals