Cisco Nexus 93360YC-FX2 - Power Cable Specifications; AC Power Cables Supported by NX-OS Mode Switches

SpecificationCharacteristic
8 ms at 930 WMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Greater than 92% at 50% loadEfficiency rating
RSP1Form factor
Power Cable Specifications
The following sections specify the power cables that you can order and use with this switch.
AC Power Cables Supported by NX-OS Mode Switches
Cord Set DescriptionPower Cord Part NumberPower Type
Power Cord Jumper, C13-C14
Connectors, 6.6 feet (2.0 m)
CAB-C13-C14-2M
Cabinet jumper power cord, 250
VAC, 10 A, C14-C13 connectors,
2.3 feet (0.7 m)
CAB-C13-CBN
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ARArgentina
250 VAC, 10 A, 3112 plug, 8.2 feet
(2.5 m)
CAB-9K10A-AUAustralia
250 V, 10 A, 6.9 feet (2.1 m)CAB-250V-10A-BRBrazil
250 VAC, 10 A, CEE 7/7 plug, 8.2
feet (2.5 m)
CAB-9K10A-EUEuropean Union
10 A, 8.2 feet (2.5 m)CAB-IND-10AIndia
Power Cord Jumper, C13-C14
Connectors, 6.6 feet (2.0 m)
CAB-C13-C14-2M-INIndia
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ISIsrael
250 VAC, 10 A, CEI 23-16/VII
plug, 8.2 feet (2.5 m)
CAB-9K10A-ITItaly
Power Cord Jumper, C13-C14
Connectors, 6.6 feet (2.0 m)
CAB-C13-C14-2M-JPJapan
125 VAC, 13 A, NEMA 5-15 plug,
8.2 feet (2.5 m)
CAB-9K12A-NANorth America
Cisco Nexus 93360YC-FX2 NX-OS Mode Switch Hardware Installation Guide
57
System Specifications
Power Cable Specifications