Need help?Do you have a question about the Cisco Nexus 9364C-GX and is the answer not in the manual?
Specifies the acceptable ambient operating and non-operating temperature ranges for the switch.
Provides guidelines to reduce EMI/RFI affecting other devices and the switch itself.
Explains the importance of earth-ground connection for the switch to protect against voltage variations.
Details the switch's power supply configuration and redundancy options.
Describes port-side intake and exhaust airflow, and how to position the switch accordingly.
Specifies the necessary physical clearances around the chassis for installation, cabling, and airflow.
Explains how to install the switch using rack-mount kits and the types of racks supported.
Provides detailed steps for attaching bottom-support rails to the rack for mounting.
Explains how to attach right-angled front-mount brackets to the chassis sides for rack mounting.
Details the process of sliding the chassis onto the installed bottom-support rails in a four-post rack.
Explains how to properly ground the switch chassis for safety and data integrity.
Guides on powering up the switch after installation and grounding.
Details how to connect Cisco Nexus 9300 leaf switches to APICs using compatible interface cards.
Explains how to connect leaf switches to spine switches for optimal forwarding in an ACI fabric.
Details how to replace power supply modules, emphasizing matching airflow and power source types.
Provides step-by-step instructions for safely disconnecting and removing an AC power supply module.
Guides on installing a replacement AC power supply, ensuring proper alignment and connection.
Details how to connect ground, negative, and positive DC power cables to a connector block.
To Next Page
General