2000-W DC Power Supply Specifications
SpecificationProperty
2000 WPower
Minimum to Maximum: -40 to -70 VDC
Nominal: -48 to -60 VDC
Input Voltage
-Frequency
90% or greater (20 to 100% load)Efficiency
Combined, n+1, and n+nRedundancy Modes
YesRoHS Compliance
YesHot Swappable
Port-side intake and port-side exhaust airflowAirflow Direction
Power Cable Specifications
The following sections specify the power cables that you can order and use with this switch.
Power Cable Specifications for AC Power Supplies
Cord Set DescriptionPower Cord Part NumberLocale
Power Cord Jumper, C13-C14
Connectors, 6.6 feet (2.0 m)
CAB-C13-C14-2M
Power cord, C13 to C14 (recessed
receptacle), 10 A, 9.8 feet (3 m)
CAB-C13-C14-AC
Cabinet jumper power cord, 250
VAC, 10 A, C14-C13 connectors,
2.3 feet (0.7 m)
CAB-C13-CBN
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ARArgentina
250 VAC, 10 A, 3112 plug, 8.2 feet
(2.5 m)
CAB-9K10A-AUAustralia
250 V, 10 A, 6.9 feet (2.1 m)CAB-250V-10A-BRBrazil
250 VAC, 10 A, CEE 7/7 plug, 8.2
feet (2.5 m)
CAB-9K10A-EUEuropean Union
10 A, 8.2 feet (2.5 m)CAB-IND-10AIndia
Cisco Nexus 9364C-GX ACI-Mode Switch Hardware Installation Guide
46
System Specifications
2000-W DC Power Supply Specifications