Need help?Do you have a question about the Cisco Nexus 93108TC-FX3 and is the answer not in the manual?
General| Form Factor | 1RU |
|---|---|
| Product Series | Nexus 9000 |
| Model | 93108TC-FX3 |
| RAM | 16 GB |
| Jumbo Frame Support | Up to 9216 bytes |
| MAC Address Table Size | 128, 000 entries |
| Operating System | Cisco NX-OS |
| VLANs | 4096 |
| Power Supply | AC or DC |
| Cooling | Front-to-back airflow |
| Operating Temperature | 0 to 40 degrees Celsius |
| Dimensions | 1.72 x 17.3 x 22.5 in (4.4 x 43.9 x 57.1 cm) |
Provides a general description of the Cisco Nexus 93108TC-FX3 switch, its capabilities, and components.
Explains the importance of proper grounding for voltage protection and operational stability.
Details the switch's dual power supply configuration and redundancy options.
Describes airflow directions (intake/exhaust) and how to identify them by fan module coloring.
Specifies requirements for installing the switch in various types of racks and cabinets.
Provides critical safety instructions and warnings for installation and operation.
Explains how fan and power supply module airflow direction affects switch placement.
Details the steps for installing the switch using the NXK-ACC-KIT-1RU rack-mount kit.
Provides instructions for installing the switch into a two-post rack using the NXK-ACC-KIT-1RU kit.
Describes the procedures for grounding the switch chassis for electrical safety.
Guides on connecting power and verifying the switch boots up correctly.
Details how to connect leaf switches to APIC controllers using VIC modules and cables.
Describes connecting leaf switches to every spine switch for optimal forwarding.
Specifies detailed electrical characteristics for 500-W AC and 1200-W HVAC/HVDC power supplies.
To Next Page