Cisco Nexus 93108TC-FX3 - 930-W DC Power Supply Specifications; Power Cable Specifications

SpecificationCharacteristic
Per power supply
• 1230 W
• 1230 W
Maximum output Watts
• For 200 to 277 VAC
• For 192 to 400 VDC
Per power supply
• 12 Vdc at 100 A
• 12 Vdc at 100 A
Power supply output voltage
• For 200 to 277 VAC
• For 192 to 400 VDC
12 V at 2.5 APower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum certified)Efficiency rating
RSP1Form factor
930-W DC Power Supply Specifications
These specifications apply to the NXA-PDC-930W power supplies.
SpecificationCharacteristic
Nominal range: -48 to -72 Vdc nominal (Range: -40 to -60 VdcDC input voltage range
23 A at -48 VdcMaximum DC input current
930 WMaximum output power per power
supply
35 A (sub-cycle duration)Maximum inrush current
8 ms at 930 WMaximum hold-up time
12 VdcPower supply output voltage
12 VdcPower supply standby voltage
Greater than 92% at 50% loadEfficiency rating
RSP1Form factor
Power Cable Specifications
The following sections specify the power cables that you can order and use with this switch.
Cisco Nexus 93108TC-FX3 ACI-Mode Switch Hardware Installation Guide
50
System Specifications
930-W DC Power Supply Specifications