To Next PageTo Next Page
Need help?Do you have a question about the Cisco Nexus 9336C-FX2-E and is the answer not in the manual?
General| Product Series | Nexus 9000 |
|---|---|
| Model | 9336C-FX2-E |
| Form Factor | Rack-Mountable |
| Total Ports | 36 |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| Operating System | Cisco NX-OS |
| Memory | 32 GB |
| Flash Memory | 16 GB |
| Humidity | 5% to 95% non-condensing |
| Input Voltage | 100 to 240 VAC |
| Input Frequency | 50 to 60 Hz |
| Input Current | 10A |
| Product Type | Switch |
| Power Supply | Dual redundant power supplies |
| Dimensions (H x W x D) | 1.72 x 17.3 x 22.5 in |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -40 to 158 °F (-40 to 70°C) |
General overview of the Cisco Nexus 9336C-FX2-E ACI-Mode Switch.
Specifies the acceptable ambient operating and non-operating temperature ranges for the switch.
Details acceptable humidity levels and methods for maintaining them for switch operation.
Notes that altitude rating is based on the installed power supply.
Discusses the impact of dust and particles on switch performance and cleanliness precautions.
Offers guidelines to reduce EMI/RFI for optimal device operation and signal integrity.
States the switch has been tested for shock and vibration resistance.
Explains the importance of proper grounding for voltage stability and component protection.
Details considerations for power supply redundancy and provisioning for peak demand.
Describes port-side intake and exhaust airflow for cooling and module coloring indicators.
Lists compatible rack and cabinet types for switch installation.
Outlines necessary clearances around the chassis for installation, cabling, and airflow.
Provides critical safety instructions and definitions for personnel performing installation.
Describes different rack-mount kit options for installing the switch in various racks.
Details airflow requirements and module positioning for optimal cooling.
Offers general guidelines for ensuring proper switch installation and connectivity.
Instructs on how to unpack and inspect the switch for damage or missing components.
Step-by-step guide for installing the switch using the NXK-ACC-KIT-1RU rack-mount kit.
Step-by-step guide for installing the switch using the N3K-C3064-ACC-KIT rack-mount kit.
Instructions for installing the airflow sleeve to ensure proper cooling.
Details the procedures for properly grounding the switch chassis.
Guides on connecting the switch to power sources and verifying its startup.
Describes the major components and topology of the Cisco ACI fabric.
Outlines considerations for connecting fabric devices, including cabling and distance.
Provides steps for connecting leaf switches to APIC controllers using virtual interface cards.
Explains how to connect leaf switches to spine switches for optimal fabric forwarding.
Instructions for installing a Gigabit Ethernet module into the switch.
Details the process for migrating from first-gen to second-gen Cisco Nexus switches.
Guides on setting up a console interface for initial switch configuration.
Instructions for establishing an out-of-band management connection for monitoring.
Step-by-step guide for safely removing optic transceivers using the extraction tool.
Provides guidelines for keeping transceivers and optical cables clean and operational.
Details the procedure for replacing a fan module while the switch is operating.
Explains how to replace power supply modules, including AC and DC types.
Lists compatible cabinet and rack types for switch installation.
Specifies general requirements for EIA cabinets and racks used with the switch.
Details specific requirements for open racks, including space and vent clearances.
Lists requirements for perforated cabinets, focusing on perforation patterns and cooling.
Provides tips for managing cables within the rack for better organization and airflow.
Lists environmental operating conditions such as temperature, humidity, and altitude.
Provides the physical dimensions of the Cisco Nexus 9336C-FX2-E switch.
Lists the weight specifications for the switch chassis and its various modules.
Directs users to resources for transceiver and cable compatibility information.
Details the typical and maximum power consumption of the switch.
Provides detailed specifications for 750-W and 1100-W AC/DC power supply modules.
Lists available power cord part numbers and descriptions for different regions.
Outlines the regulatory compliance and safety standards the switch adheres to.
Describes the location and function of the switch chassis LEDs.
Explains the LED indicators for the fan modules and their status meanings.
Details the LED status indicators for the power supply modules.
Lists the contents and illustrations for the 1-RU rack-mount kit.
Details the airflow sleeve and its purpose for cooling the switch.
