CHAPTER 1
Overview
• Overview, on page 1
Overview
The Cisco Nexus 9336C-FX2-E switch (N9K-C9336C-FX2-E) is a 1-rack mount unit (RU), fixed-port switch
designed for spine-leaf-APIC deployment in data centers.
This switch has 36 40/100-Gigabit QSFP28 ports. Ports 31-36 are default fabric links (The last 2 ports 35-36
are reserved for fabric links). Downlink ports, 1-30 by default, support 4x10/4x25-Gigabit breakout. Up to
34 breakout ports are supported, ports 31-34 are convert-able to downlink ports. All ports support 10-Gigabit
with a QSA adapter (CVR-QSF-SFP10G). Ports 7-32 support 1-Gigabit with QSA adapter.
To determine which transceivers, adapters, and cables this switch supports, see the Cisco Transceiver Modules
Compatibility Information document.
This switch has the following ports:
• 36 40/100-Gigabit QSFP28 ports
• Two management ports (one 10/100/1000BASE-T port and one SFP port)
• One console port (RS-232)
• One USB port
This switch includes the following user-replaceable components:
• Fan modules (6) with the following airflow choices:
• Port-side exhaust fan module with blue coloring (NXA-FAN-35CFM-PE)
• Port-side intake fan module with burgundy coloring (NXA-FAN-35CFM-PI)
• Port-side exhaust fan module with blue coloring (NXA-SFAN-35CFM-PE)
• Port-side intake fan module with burgundy coloring (NXA-SFAN-35CFM-PI)
To enable or disable displaying the serial number of the NXA-SFAN-35CFM-PI
or NXA-SFAN-35CFM-PE fan, enter the [no] hardware fan-sprom command.
Note
Cisco Nexus 9336C-FX2-E ACI-Mode Switch Hardware Installation Guide
1
To Next Page
Loading...
