Cisco Nexus 9336C-FX2-E - Airflow Sleeve

SpecificationCharacteristic
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum certified)Efficiency rating
RSP1Form factor
1100-W DC Power Supply Specifications
These specifications apply to the following power supplies:
• NXA-PDC-1100W-PE
• NXA-PDC-1100W-PI
SpecificationCharacteristic
Nominal range: -54VDC (Range: -40 to -72 VDC)DC input voltage range
32 A at -40 VDCMaximum DC input current
1100 WMaximum output power per power
supply
90 A (cold turn on)Maximum inrush current
4 ms at 100% loadMaximum hold-up time
12 V/ 90APower supply output voltage
3.3 V/ 3APower supply standby voltage
94% at 50% loadEfficiency rating @ -48VDC
Power Cable Specifications
The following sections specify the power cables that you can order and use with this switch.
Power Cable Specifications for AC Power Supplies
Cord Set DescriptionPower Cord Part NumberLocale
Power Cord Jumper, C13-C14 Connectors, 6.6 feet
(2.0 m)
CAB-C13-C14-2M
Cabinet jumper power cord, 250 VAC, 10 A, C14-C13
connectors, 2.3 feet (0.7 m)
CAB-C13-CBN
Cisco Nexus 9336C-FX2-E ACI-Mode Switch Hardware Installation Guide
54
System Specifications
1100-W DC Power Supply Specifications