Grounding pad2Screw holes (6) for attaching rack mounting
brackets
1
USB support is limited to USB 2.0 devices that use less than 2.5 W (less than 0.5 A inclusive of surge current).
Devices, such as external hard drives, that instantaneously draw more than 0.5 A are not supported.
Note
Depending on whether you plan to position the ports in a hot or cold aisle, you can order the fan and power
supply modules with port-side intake or port-side exhaust airflow. To determine the airflow direction of the
modules installed in your switch, see the following table.
Port-Side Exhaust Airflow ColoringPort-Side Intake Airflow ColoringReplaceable Modules
BlueBurgundyFans
BlueBurgundyAC power supplies
WhiteHVAC/HVDC power supplies
Blue
BurgundyDC power supplies
The fan and power supply modules are field replaceable. You can replace one fan module or one power supply
module during operations, so long as the other modules are installed and operating. If you have only one
power supply installed, you can install the replacement power supply in the open slot before removing the
original power supply.
Cisco Nexus 92348GC-X NX-OS Mode Switch Hardware Installation Guide
3
Overview
Overview