Cisco PIX 501 Hardware Installation Guide

Contents
iv
Cisco PIX Firewall Hardware Installation Guide
78-15170-01
CHAPTER 3 PIX 506E 3-1
PIX 506E Product Overview 3-1
Installing the PIX 506E 3-3
Connecting a Power Supply Module to the PIX 506E 3-3
CHAPTER 4 PIX 515/515E 4-1
PIX 515/515E Product Overview 4-1
Installing the PIX 515/515E 4-3
Surface Mounting the PIX 515/515E 4-4
Rack Mounting the PIX 515/515E 4-4
Vertical Mounting the PIX 515/515E 4-5
Installing the PIX 515/515E 4-5
PIX 515/515E Feature Licenses 4-7
PIX Firewall VPN Accelerator Card 4-8
PIX Firewall VPN Accelerator Card+ 4-8
Installing Failover 4-9
Installing LAN-Based Failover 4-11
Removing and Replacing the PIX 515/515E Chassis Cover 4-12
Removing the Chassis Cover 4-12
Replacing the Chassis Cover 4-13
Replacing a Lithium Battery 4-14
Installing a Memory Upgrade 4-14
Memory Installation Steps 4-15
Installing a Circuit Board in the PIX 515/515E 4-17
PIX Firewall VPN Accelerator Circuit Board 4-20
Installing the PIX 515/515E DC Model 4-20
CHAPTER 5 PIX 520 5-1
PIX 520 Product Overview 5-1
Installing the PIX 520 5-4
PIX 520 Feature Licenses 5-6
Installing Failover 5-7
Installing LAN-Based Failover 5-8
Removing and Replacing the PIX 520 Chassis Cover 5-10
Removing the Chassis Cover 5-10
Replacing the Chassis Cover 5-11
Replacing a Lithium Battery 5-12

Cisco PIX 501 Specifications

General

VPN Throughput	3 Mbps
Maximum VPN Peers	10
Firewall Type	Stateful
Power Supply	12V DC
Interfaces	4 x 10BASE-T Ethernet