Cisco PIX 501 Hardware Installation Guide

Contents
v
Cisco PIX Firewall Hardware Installation Guide
78-15170-01
Installing a Memory Upgrade 5-12
Memory Installation Steps 5-13
Installing a Circuit Board in the PIX 520 5-15
PIX Firewall 16 MB Flash Circuit Board 5-18
PIX Firewall VPN Accelerator Circuit Board 5-19
Gigabit Ethernet Circuit Board 5-20
Installing the PIX 520 DC Model 5-21
CHAPTER 6 PIX 525 6-1
PIX 525 Product Overview 6-1
Installing the PIX 525 6-3
PIX 525 Feature Licenses 6-5
PIX Firewall VPN Accelerator Card 6-6
PIX Firewall VPN Accelerator Card+ 6-6
Installing Failover 6-6
Installing LAN-Based Failover 6-8
Removing and Replacing the PIX 525 Chassis Cover 6-9
Removing the Chassis Cover 6-9
Replacing the Chassis Cover 6-11
Replacing a Lithium Battery 6-12
Installing a Memory Upgrade 6-12
Memory Installation Steps 6-12
Installing a Circuit Board in the PIX 525 6-14
PIX Firewall VPN Accelerator Circuit Board 6-17
Gigabit Ethernet Circuit Board 6-18
Installing a DC Power Supply 6-19
Rerouting the Fan Wiring 6-24
CHAPTER 7 PIX 535 7-1
PIX 535 Product Overview 7-1
PIX 535 Network Interface Description 7-4
Installing the PIX 535 7-5
Before Installing the PIX 535 7-5
Mounting the PIX 535 7-5
PIX 535 Network Interface Installation 7-5
PIX 535 Feature Licenses 7-6
PIX Firewall VPN Accelerator Card 7-7
PIX Firewall VPN Accelerator Card+ 7-7

Cisco PIX 501 Specifications

General

VPN Throughput	3 Mbps
Maximum VPN Peers	10
Firewall Type	Stateful
Power Supply	12V DC
Interfaces	4 x 10BASE-T Ethernet