5-1
User Guide for the Catalyst Express 520 Switches
OL-12761-02
CHAPTER
5
Changing the Switch Network
Settings
Read this chapter to understand the concepts and tasks for changing basic network
settings on the switch through the device manager.
We strongly recommend that you download the Cisco Configuration Assistant
from Cisco.com and use it to optimize the switch to operate in your existing
network. You can download it from this Cisco.com site:
http://www.cisco.com/go/configassist
Before You Begin
Before you can customize the switch settings, the switch must first have an IP
address. If it does not have one, make sure that you have followed the steps to set
up the switch in Chapter 2, “Setting Up the Switch.”
Before you configure the switch, review the information in the Release Notes for
the Catalyst Express 520 Switches on Cisco.com.
Chapter Topics
• Change the Switch IP Information, page 5-2
• Change Optional Administrative Settings, page 5-2
• When You Are Done, page 5-3
To Next Page
Loading...
