Need help?Do you have a question about the Cisco Router Cisco IOS XR and is the answer not in the manual?
Details the interfaces used for router management: CLI, Craft Works, XML API, and SNMP.
Explains how to select and identify the Designated Shelf Controller (DSC) on Cisco routers.
Provides instructions for establishing an initial connection to the router via the console port.
Provides steps to connect to the router and configure root-system username and password.
Explains how to verify the router's status using show commands after initial system bring-up.
Provides overview and rack number planning information before bringing up a multishelf system.
Includes instructions to configure and verify Catalyst switches for the CRS-1 multishelf router.
Describes integrated switches on fabric chassis and their role in control network connections.
Details the procedure to bring up and configure Rack 0 in the multishelf system.
Provides steps to bring up and configure Fabric Card Chassis (FCCs) in the multishelf system.
Guides on bringing up and configuring the next Line Card Chassis (LCC) in the multishelf system.
Describes how to connect to the router using a terminal or PC for management.
Details the login process, including username, password validation, and user group assignments.
Describes how usernames and passwords determine access rights and command usage.
Explains the different command modes and how to navigate between them using the CLI.
Details the two-stage configuration process: target configuration and commit.
Explains how to configure the hostname for an SDR to identify it on the network.
Provides steps to configure the Management Ethernet interface for remote management.
To Next Page
General